Medeli DIGITAL DRUM Owner's Manual download pdf (Page 16)

Making the Settings for Pads

About Settings of Pads

Adjusting the Pad Sensitivity

Setting the Pad Threshold

Eliminating Crosstalk between Pads

Pad Settings

Sensitivity(1-16)

Threshold(0-16)

Crosstalk(1-16)

Curve(1-6)

Rim Sensitivity(1-16)

Splash Sensitivity(1-9)

Pad

Special

Press the [PAGE] or [UTILITY] button, select Pad Sensitivity

page. The display will show:

Changes how a pad responds to your playing. At higher

sensitivities, the pad will generate a louder signal, even when

you play softly. At lower sensitivities, the pad will generate a

quieter signal, even if you play strongly. Adjust according to

your playing style and desired dynamic range.

Press the [PAGE] or [UTILITY] button, select Pad Threshold

page. The display will show:

Changes how forcefully you must strike the pad to generate a

trigger signal. Setting a high threshold requires hitting the pad

very hard to get a sound. This can help cut out transient

responses, such as vibrations from the kit or accidental pad

taps that you don’t intend to generate sounds. Setting a low

threshold means even light touches will produce sound. Adjust

according to environment and playing style.

Press the [PAGE] or [UTILITY] button, select Pad Crosstalk

page. The display will show:

When two pads are mounted close to each other, hitting one

pad may trigger the sound from another pad unintentionally.

This effect can be eliminated by setting this parameter to a

higher value on the pad is triggered unintentionally.

UTILITY

TEMPO

BEAT

If the digital drum is not yet in UTILITY menu, press the

[UTILITY] button to enter it.

The UTILITY indicator will light up. You can use the [ ] or [ ]

buttons to adjust parameters (as shown to the right ) for each

pad as well as the rim sensitivity of the pad and the splash

sensitivity of the Hi-Hat control pedal.

The current pad to be edited can be selected either by pressing

its Pad Select button, or by striking the pad itself. The PAD

indicator will light up to show which pad is currently selected. If

the rim of a pad is selected, both the PAD indicator and the

RIM indicator will turn on.

UTILITY

TEMPO

BEAT

UTILITY

TEMPO

BEAT

UTILITY

HI-HAT

SNARE

CRASH 1

TOM 1 TOM 2

TOM 3

KICK

TOM 4

CRASH 2

RIDE

HI-HAT

CONTROL

HINT

If the value is set too high, then when two

pads are played simultaneously, the one that

is struck less forcefully will not sound. So be

careful and set this parameter to the minimum

value required to prevent such crosstalk.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Comments to this Manuals

No comments

Medeli DIGITAL DRUM Owner's Manual Page 16

Comments to this Manuals

Related products and manuals for Music drums Medeli DIGITAL DRUM